Effectiveness of corrosion protection of reinforced concrete with thermoplastic powder coatings
DOI:
https://doi.org/10.32347/tit.2024.71.01.05tit.2024.71.01.05Keywords:
reinforced concrete, thermoplastic powder coat-ings, polyvinylidene fluoride, corrosion re-sistance, efficiencyAbstract
Abstract. In modern construction, there is a persistent trend of increasing levels of corrosive aggressiveness, which negatively affects the reliability and durability of reinforced concrete buildings and structures. Achieving their effective protection from corrosion under the complex influence of various destructive environmental factors, while considering environmental protection regulations, as well as the economic and technological aspects of sustainable development, determines the focus of scientific research towards the use of innovative, durable protective coatings, among which thermoplastic coatings hold one of the leading positions. When creating such materials, the key feature is ensuring the long-term preservation of the operational characteristics of building products and structures, with the implementation of environmentally safe and economically viable production technologies.
A traditional method of protecting construction products and structures from corrosion is the application of liquid paint materials based on organic compounds. The drawback of these materials is the presence of solvents in their composition, which inevitably leads to their emission during production and application, with a corresponding catastrophic impact on the environment. In connection with the tightening of health and environmental safety requirements in the industrial finishing industry, the ecological aspects of the production and use of paint materials, especially regarding the content of volatile organic compounds (VOCs), heavy metals, and other harmful substances, are gaining paramount importance. This emphasizes the expansion of scientific research in the development of protective thermoplastic coatings that meet dual requirements:
environmental friendliness and durability
References
REFERENCES
Moon HY., Shin DG, Choi DS. Evaluation of the durability of mortar and concrete applied with inorganic coating material and surface treatment system. Constr. Build Mater, 2007, рр. 362–369.
Dobshyts L. M. Ways to increase the durability of cement concrete. Transport: Science, technology, management, 2002, No. 12, рр. 31–34 (in Ukrainian).
J.B. Aguiar, A. Camões Coatings for concrete protection against aggressive environments. Adv. Concr. Tech., 2008, №6, рp. 243-250
A.A. Almusallam, F.M. Khan, S.U. Dulaijan, O.S.B. Al-Amoudi. Effectiveness of surface coatings in improving concrete durability. Cem. Concr. Compos. 25 (4), 2003, рр. 473-481.
Raupach M, Wolff L. Long-term durability of surface protection systems over concrete. J Protect Coat Linings 21(6), 2004, рр. 29-37.
A. Brenna, F. Bolzoni, S. Beretta, M. Ormellese. Long-term chloride-induced corrosion monitoring of reinforced concrete coated with commercial polymer-modified mortar and polymeric coatings, Constr. Build. Mat. 48, 2013, pp. 734-744.
Moshchansky N.A. Increasing the durability of construction materials and structures operating in aggressive environments. M. Gosstroyarchizdat, 1962, 235 p (in Ukrainian).
Yu. P. Kvachev, L. N. Sedov, P. WITH. Li Production and processing of plastics, synthetic resins and fiberglass. TEI, 1968, No. 6., рр. 32–35 (in Ukrainian).
A. Schieweck, M.-C. Bock, Emissions from low-VOC and zero-VOC paints - Valuable alternatives to conventional formulations also for use in sensitive environments, Build. Environ. 85 (2015), 243–252.
W.R. Chan. National volatile organic compound emission standards for aerosol coatings, Metal Finishing, 107 (11), (2009) pp. 29-31,33.
E. Spyrou Powder Coatings Chemistry and Technology, 3rd Edition, Hanover: Vincentz Network GmbH & Co KG, 2012.
Gots Vladimir, Lastivka Oles, Tomin Oleksandr and Kovalchuk Olga. Influence of Film-Forming Components on the Corrosion Resistance of Powder Coating, Materials Science Forum. 2019, Vol. 968, pp. 143-152.
Gots V.I., Lastivka O.V., Berdnyk O.Yu., Tomin O.O., Shilyuk P.S. Corrosion resistance of polyester powder coatings using fillers of various chemical nature, Key Engineering Materials, 2019, Vol. 864, 115-121.
V Gots, O Lastivka, O Berdnyk, O Tomin. Influence of modifying additives on properties of the powder coatings – IOP Conference Series: Materials Science and Engineering, 2021, № 1, p. 012044.
Samchenko D.M., Bagliuk G.A., Kochetov G.M., Lastivka O.V., Derecha D.O., Prikhna T.O. Mechanical and Functional Properties of Composite Coatings with Fine Reinforcements Produced from Galvanic Processing Waste. Powder Metall Met Ceram, 2023. Vol. 62, Nos. 3–4 (550), pp. 124–133.
DSTU ISO 8130-11:2019 (2019) Powder coatings. Part 11. Determination of flowabil-ity on an inclined plane, 7 (in Ukrainian).
DSTU ISO 4624:2019 (2019) Paints and varnishes. Determination of adhesion by the peel method (in Ukrainian).
DSTU ISO 6272-2:2015 (2015) Paints and varnishes. Rapid deformation test (impact strength). Part 2. Drop test, small area in-denter (in Ukrainian).
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the CREATIVE COMMONS copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons Attribution License, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
